浅谈卷帘门的防锈或腐化办法 - 行业讯息-lehu88乐虎游戏官网门业有限公司

lehu88乐虎游戏官网-乐虎lehu66_送彩金app

征询热线
-->
以后地位: 首页 > 讯息中央 > 行业讯息 >

浅谈卷帘门的防锈或腐化办法

公布人:    公布日期:2020-12-15 16:41:32

电动卷帘门操纵复杂,运用方便,被视为高科技产物,因而许多用户会无视电动卷帘门的平安留意事变,这就发生了平安隐患的存在。
  The electric roller shutter door is easy to operate and use, and is regarded as a high-tech product. Therefore, many users will ignore the safety precautions of the electric roller shutter door, which leads to the existence of security risks.
  以是在实践操纵中,照旧要留意一些电动卷帘门的运用和维护事变。电动卷帘门是一种卷帘门,选用电动驱动,复杂敏捷。用于堆栈、阛阓等场合。
  So in the actual operation, we still need to pay attention to the use and protection of some electric roller shutter doors. Electric roller shutter is a kind of roller shutter, which is driven by electric motor, simple and sensitive. Used in warehouses, shopping malls and other places.
  卷帘门图案生锈
  Rusty design of rolling shutter door
济南卷帘门
  1、当卷帘门放下时要晓得长度与空中的间隔不该大于50mm。
  1. When the roller shutter is put down, the distance between the time limit length and the ground shall not be greater than 50mm.
济南卷帘门
  2、对卷帘门的金属部件要留意维护和颐养,避免生锈或腐化景象。
  2. Pay attention to the protection and maintenance of the metal parts of the rolling shutter door to prevent rust or corrosion.
  3,有须要防火卷帘门的设置装备摆设上一边设置装备摆设,布置的低真个包能够需求树立一个可挪动可挪动盖板在天花板上,下端有须要分开500毫米边长的可装配维修孔,维修和维护。
  3. It is necessary to install the equipment on the upper side of the fire-proof rolling shutter door. The low-end package may need to build a movable cover plate on the ceiling. The lower end needs to leave the removable maintenance hole with a side length of 500mm for maintenance.
  4、有须要将梁座上端与卷帘门底部的轴承坚持至多200mm的间隔,以包管当制动器中止时不发作车顶的景象。
  4. It is necessary to keep a distance of at least 200 mm between the upper end of the beam seat and the bearing at the bottom of the roller shutter door to ensure that the roof will not occur when the brake stops.
  5、卷帘门运用前的反省和了解其任务的偏向,长度和偏向的极限高度的门,也不容易侵害限定安装,以避免反向转动到顶部的构成和其他丧失。
  5. The roller shutter door shall be inspected before use and the door which understands the working direction, length and ultimate height of the direction shall not easily damage the limiting device to prevent the formation of reverse rolling to the top and other losses.
  6、当卷帘门任务时如有较大的颤抖能够是活动非常时,发起立刻中止反省,并反省能否有杂物阻碍任务。
  6. When the rolling shutter door works, if there is a large vibration which may be caused by abnormal movement, it is recommended to stop the inspection immediately and check whether there are sundries hindering the work.
  7. 发起每年反省卷扬机三次,以包管任务质量。
  7. It is recommended to check the winch three times a year to ensure the work quality.
  8、卷帘门操纵时,操纵者要站在卷帘门任务的方位地位停止操纵,避免不测破坏。
  8. When operating the rolling shutter door, the operator shall stand at the working position of the rolling shutter door to prevent accidental damage.
  以上便是济南卷帘门厂小编与您分享的关于卷帘门防锈或腐化的知识,盼望能对您有所协助。
  The above is the knowledge about anti rust or corrosion that Jinan roller shutter factory has shared with you. I hope it can help you.
上一篇:济南卷帘门停止丈量需求掌握好那几点题目
下一篇:最初一页
产物中央
联络我们