公布人： 公布日期：2020-12-08 15:39:50
The development of rolling shutter doors in China has been quite mature, both enterprises and personal garages are widely used, fire prevention, anti-theft and other security measures are also very perfect. Jinan roller shutter door market demand is also very big, many consumers purchase roller shutter door manufacturers to measure, after the measurement, return to the manufacturer for production, which undoubtedly increases a process and wastes a lot of time. Today, we will explain five points for consumers to measure by themselves:
1. Double sided right angle wall. The surveyor should take the initiative to solicit opinions from customers of Jinan roller shutter door. Results: first, the customer chooses to keep the left and right lines, which is unified and beautiful. The surveyor can reduce the target size by 120mm, that is, the above goal can be achieved; second, the customer chooses the target size unchanged, and the installation workers cut the line close to the double right angle wall until it is appropriate.
2. Top wall right angle. The surveyor should take the initiative to solicit opinions from customers of Jinan roller shutter door. Firstly, the customer chooses to keep the line, which is unified and beautiful. The surveyor can reduce (shorten) the target size by 60mm, that is, the above goal can be achieved; secondly, the customer chooses the target size unchanged, and the installation workers cut the line to be appropriate during installation
3. Floor. As the actual situation of customers varies greatly, it can be divided into three categories: the first is that the floor has been paved, which can be measured by the above measurement method; the second one is that the floor is not paved, and the height should be reduced by: A. floor tiles: marble and ceramic tiles should be reduced by 50mm; B. the flat wooden floor, composite floor and solid wood floor should be reduced by 30mm; C. the framework wooden floor should be consistent with the actual situation The floor thickness shall be increased by 10 mm.
4. Verticality and inclination of left and right walls and top walls. The measurer should pay attention to choose Zui dots as the target size.
5. Single right angle wall. The surveyor should take the initiative to solicit the customer's opinions. Results: first, the customer chooses to keep the left and right lines, which are unified and beautiful. The surveyor and the customer indicate that the target size can be reduced by 60mm. The second is that the customer chooses the target size to be unchanged (the customer requires the door leaf to be a little larger), and it must be explained to the customer that the installation of the line near the right angle wall frame should be cut down until it is appropriate If the line is asymmetric.
As long as consumers keep the above five points in mind, they can easily measure the size of the rolling shutter door that needs to be installed. In this way, we can directly communicate with Jinan rolling shutter door manufacturers to help you save time and quickly install reliable and practical rolling shutter doors!