公布人： 公布日期：2020-10-21 14:57:14
The outdoor door of residence is an important structure for external protection. Aluminum alloy door is usually used in home decoration. The installation quality of aluminum alloy door has a great influence on the later use and service life. Therefore, when the aluminum alloy door installation is completed, we should check the appearance, profile, hardware fittings, opening and closing aspects of the door. Learn with Xiaobian!
The quality of the decoration of the whole villa is directly affected by the quality of the aluminum alloy outside the door. The appearance inspection of aluminum alloy door includes the inspection of whether there are cracks, deformation and complete accessories. The following are the basic operations of inspection:
1 appearance view
The gloss and appearance of the gatekeeper are not significantly uneven in color. Then use a ruler to measure whether the diagonals of the gate are common or not, and look closely for scratches.
2 accessories check
Whether the device interface of accessories is harmonious and beautiful with the door surface. There should be no significant gap between the lock handle and the profile, and the joint gap should be less than 1 mm.
The quality of the door frame device directly affects the firmness of the whole aluminum art door. The view of the door frame can be viewed from its firmness and flatness and structural tightness.
3. Check the tightness of wall connection
Check whether the joint between the aluminum art door and the wall is tight, and whether all the embedded parts at the joint are well fixed.
4 check the door lock device
Check the door lock to see if the position of the door lock is correct and whether it is installed reversely. Check whether the devices on both sides of the lock correspond and whether there is dislocation. Then shake the door lock by hand to see if it is loose.
Jinan garage door
5 check the use of door lock
Check the activity sensitivity of the door lock to see if it can perform the anti lock and unlock action smoothly; then check whether the push-pull of the door is smooth and sensitive, including whether the door opens and closes smoothly and whether there is abnormal shaking after the lock is locked.
6 motor operation check
Check whether the motor connector is loose, abnormal is the main point of our inspection. Turn on the remote control switch to test whether the door is working normally and whether there is abnormal resistance and movement in the process of walking; close the door and check whether the door leaf and the frame fit tightly. The sliding door should be checked to see whether the pulling force is smooth.