公布人： 公布日期：2019-09-17 10:59:55
After the electric curtains are installed, we can test them from these places.
1. In the process of opening and closing the electronic shutter, the function should be stopped, and the sliding should not be stopped. If the sliding distance exceeds 50 mm, the shutter control device and the door roller brake should be inspected and repaired carefully immediately until normal operation.
2. Installation position of upper end of shutter, reliable fire fighting facilities, movable cover plate of electric curtain is set on drum box or ceiling at lower end. The electric curtain machine must reserve 500 x 500 mm detachable check hole at lower end for easy maintenance.
3. Paint and embroidery maintenance should be carried out regularly for rolling curtain doors, curtains and rusty parts. Heavy and hard objects are prohibited from hitting the surface.
4. Horizontal rolling shutter door curtain, positioning the upper and lower lines, the left wheel is the upper limit, the right wheel is the lower limit, (according to the needs of the site adjustment).
5. When installing the electric rolling shutter door, we must ensure that the rolling shutter door and the wall become a whole. After closing, we can paint the hole and the wall well. After finishing painting, the door seam should be smooth and even. When opening the electric rolling shutter door, it should be carried freely. It should not be too tight, too loose and springback.
Household electric shutters often have to be switched on and off. When they are opened, they often face the wall directly. For a long time, the electric shutters and handles on the lock box are easy to touch the marks on the wall, damage the walls and doors, and affect the beauty. A rubber about 5 centimeters thick can be found on a small piece of wood or nailed to a thick rubber, which is nailed to the inside of the door at the lower corner of the hinged side, so that the door and window will not be damaged.